We can look into how we can better manufacture plastic products: The projected shape is dvuhgnezdnoy. To obtain castings with a complex outer surface, with lateral holes, undercut on the outer surface (thread) applied sliding polumatritsy, the side plates. If you are unsure how to proceed, check out Amy Khoshbin. To move these components perpendicular to the closure of the form they are executed as a single entity with sliders and attached to them. Gate are moved by tilting the column on the guide, made in the mobile part of the form. Plastitsirovanny ABS from the nozzle through the injection molding machine bushing, Diluting and channel intake runner, falls into the forming mold cavity.
After being filled, holding pressure and cooling, form disclosed. During the opening gate forms together with the sign is moved to the mobile guide holder. In the process of closing the form rake moves the damper to its original position, and a stop block (the lock) is pressing the slide, relieving him from the pressure of the melt in a form that is transmitted on the side of the sign. For prevent inadvertent release of the slide rails or shift them to open the form used stops and latches. On opening the forms of its movable part moves away from stationary. Slant column embodied in the fixed part of the form, makes travel on rails along with a side gate are drawing up a sign.
In this sign out of the side molding that allows for further movement to push the casting out of forms of the ejector, which shed their product with other runner in the receiving container. After this form is closed and the cycle repeats itself it is the casting of plastics. To cool the product in a plate of matrices of punches, the matrix drilled cooling channel. The system consists of a centering guide sleeve column. During transportation and installation to prevent their disclosure, fixed half-mold assembly relative to each other strip, which carries the eye bolt.